Skip to content
AeroSystems
AeroSystems
Colour theme
gamyaa.aerosystems@gmail.com+91 98866 43942
Gamyaa AeroSystems · Platform 01Status: In Development

DAQIP™ Defence Aerospace Quality Intelligence Platform

A digital quality intelligence platform connecting engineering drawings, First Article Inspection, inspection, manufacturing evidence and approval.

Every requirement. Every measurement. Every approval. Traceable.

Request a DAQIP DemoDiscuss an Aerospace Quality Problem
Research & Product Development (opens in a new tab)

What is DAQIP?

DAQIP is the Defence Aerospace Quality Intelligence Platform developed by Gamyaa AeroSystems for aerospace and defence manufacturing quality, First Article Inspection, inspection intelligence, manufacturing evidence, supplier quality and engineering traceability.

DAQIP — in one sentence

DAQIP is Gamyaa AeroSystems' defence and aerospace manufacturing quality intelligence platform for FAI, inspection, quality evidence and engineering traceability.

Made by
Gamyaa AeroSystems, Bangalore, India
For
Aerospace & defence manufacturers, suppliers, quality and inspection teams
Status (October 2026)
In Development

Available on this site now

What You Can Explore Today

DAQIP is in development. These interactive demonstrations and models use illustrative data. They show how DAQIP is designed to work; they are not the released product.

Interactive FAI prototype

Follow one characteristic from drawing to approval

Select a balloon. Each characteristic carries its requirement, manufacturing operation, inspection method, measurement, evidence, reviewer and approval decision.
  1. Drawing
  2. Characteristic
  3. Inspection Method
  4. Measurement
  5. Evidence
  6. Approval
Illustrative engineering drawing with FAI balloonsA fictitious flanged bushing shown in an end view and section A–A, with balloons 14 to 19 on the overall length 25.40 ±0.10, flange diameter Ø40.00 ±0.05, a four-hole pattern with position tolerance to datums A, B and C, bore diameter Ø12.00 ±0.02, bore surface texture Ra 1.6 and flatness 0.02 on datum face A.8877665544332211DDCCBBAAAA4× Ø5.50 ±0.05Ø0.10ABCCEND VIEWØ40.00 ±0.0525.40 ±0.10Ø12.00 ±0.02BRa 1.60.02ASECTION A–ANOTES1. DIMENSIONS IN MILLIMETRES.2. BREAK SHARP EDGES 0.2 MAX.3. ILLUSTRATIVE DRAWING. NOT FOR MANUFACTURE.GAMYAA AEROSYSTEMSILLUSTRATIVETITLE FLANGED BUSHING · FICTITIOUS PARTDWG DEMO-01REV CSCALE 2:1UNITS mmSHEET 1/1NOT A CUSTOMER DWG

Select a characteristic

Evidence trace

Illustrative

  1. Characteristic

    #17 · Bore diameter · datum B

  2. Engineering Requirement

    Ø12.00 ±0.02 mm

  3. Manufacturing Process

    Op 20 · bore and ream

  4. Inspection Method

    Bore gauge, verified on CMM

  5. Measurement

    Ø12.008 mm · within tolerance

  6. Evidence

    CMM report · AS9102 Form 3, line 17

  7. Reviewer

    Quality engineer · verified

  8. Approval

    Approved

Fictitious part and values for illustration only. In DAQIP, AI may suggest characteristics; engineers verify them and quality approves.

From Engineering Intent to Manufacturing Evidence.

AI assists. Engineers verify. Quality approves. DAQIP preserves the evidence.

Workflow

  1. Engineering
  2. Manufacturing
  3. Inspection
  4. Evidence
  5. Approval

Intelligence layers

DAQIP capabilities

Each layer is labelled with its status as of October 2026. Roadmap items are not presented as released.

  • Drawing Intelligence

    Status: In Development

    Engineering drawings turned into structured, reviewable requirements.

    • Engineering drawings
    • Dimensional characteristics
    • GD&T
    • Tolerances
    • Notes
    • Revision understanding

  • First Article Inspection Intelligence

    Status: In Development

    Characteristic accountability from balloon to approved FAIR.

    • Ballooning
    • AS9102 Forms 1, 2 and 3
    • Full FAI
    • Partial FAI
    • Delta FAI
    • FAIR workflow
    • Characteristic accountability

  • Inspection Intelligence

    Status: In Development

    Every characteristic mapped to a method, a gauge and a result.

    • Inspection planning
    • Measurement method mapping
    • Gauges
    • CMM integration (planned)
    • Inspection evidence

  • Manufacturing Quality

    Status: In Development

    In-process and final inspection records linked to requirements.

    • In-process inspection
    • Final inspection
    • Manufacturing records
    • Quality evidence

  • Supplier Quality

    Status: Planned

    Supplier FAIRs and inspection evidence held to the same standard.

    • Supplier FAIR workflow
    • Supplier inspection records
    • Acceptance / rejection
    • Supplier evidence

  • Nonconformance Intelligence

    Status: Planned

    Nonconformances traced to the characteristic and closed with evidence.

    • NCR
    • MRB
    • Root cause
    • Corrective action
    • CAPA

  • Configuration Intelligence

    Status: Planned

    Drawing revisions and their impact on inspection and FAI.

    • Drawing revisions
    • Change impact
    • Delta FAI
    • Traceability

  • Quality Evidence Graph

    Status: In Development

    Requirement → Method → Measurement → Evidence → Approval.

    Requirement → Method → Measurement → Evidence → Approval

    • Requirement-level traceability
    • Method and measurement linkage
    • Evidence provenance
    • Approval history

  • AI Assurance

    Status: In Development

    Human-controlled AI assistance. AI never approves quality.

    • AI suggestions marked as unverified
    • Engineer verification before use
    • Quality approval remains human
    • Every AI-assisted step recorded

  • Cybersecurity

    Status: In Development

    Engineering data protected by design.

    • Role-based access
    • Audit trails
    • Evidence integrity
    • Provenance
    • Protected engineering data

  • Executive Quality Intelligence

    Status: Planned

    Quality trends that leadership can act on.

    • Supplier risk
    • Recurring defects
    • Inspection trends
    • Rejection patterns
    • Cost of poor quality
    • Manufacturing-quality analytics

AI assurance

Human engineering authority, by design

AI in DAQIP is an assistant. It never approves a part, a characteristic or a report.
  1. 01

    AI assists

    Suggests characteristics, GD&T and methods from the drawing, marked as unverified.

  2. 02

    Engineers verify

    Every suggestion is reviewed, corrected or rejected by an engineer.

  3. 03

    Quality approves

    Approval is a recorded human decision with name, role and time.

  4. 04

    DAQIP preserves the evidence

    Requirement, method, measurement, evidence and approval stay linked.

DAQIP supports AS9102-aligned First Article Inspection workflows. It does not by itself make an organisation compliant with AS9102 or AS9100, and it holds no formal compliance certification.
First Article Inspection with DAQIP

Questions

DAQIP questions

What is DAQIP?

DAQIP is the Defence Aerospace Quality Intelligence Platform developed by Gamyaa AeroSystems for aerospace and defence manufacturing quality, First Article Inspection, inspection intelligence, manufacturing evidence, supplier quality and engineering traceability.

Who makes DAQIP?

DAQIP is developed by Gamyaa AeroSystems, Bangalore, India.

Who is DAQIP for?

Aerospace and defence manufacturers and MSMEs, their quality and inspection teams, inspection and metrology partners, and the engineering teams that define manufacturing and inspection requirements.

What problem does DAQIP solve?

Quality evidence in aerospace and defence manufacturing is often spread across drawings, spreadsheets, inspection reports and email. DAQIP links each drawing requirement to its inspection method, measurement, evidence and approval so that every characteristic can be traced and reviewed.

Which standards and processes does DAQIP support?

DAQIP is designed around First Article Inspection workflows aligned with AS9102 (Forms 1, 2 and 3; full, partial and delta FAI), GD&T-based drawing characteristics, inspection planning and nonconformance handling. Using DAQIP does not by itself make an organisation compliant with AS9102 or AS9100; compliance remains the responsibility of the organisation's quality system.

Is DAQIP available today?

DAQIP is in development. Drawing, First Article Inspection, inspection and manufacturing-quality workflows are being built first. Supplier quality, nonconformance, configuration and executive analytics are planned. Each capability on this page carries its current status.

Does DAQIP approve parts automatically?

No. AI in DAQIP assists engineers, for example by suggesting characteristics from a drawing. Engineers verify, quality approves, and DAQIP records the evidence and the approval history.

See DAQIP on a First Article Inspection workflow

We are looking for aerospace and defence manufacturers to pilot DAQIP on real FAI and inspection work.
Request a DAQIP DemoDiscuss an Aerospace Quality Problem